NSN 5955-00-951-9024 · NIIN 009519024 · FSC 5955
NO DASHES 5955009519024
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 5.0 AND MILLIWATTS MINIMUM 4.0 AND MILLIWATTS MAXIMUM 6.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 80.0 TO 90.0 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.008 TO 0.008 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 24.0 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 80.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 8.500 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 85.0 |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | NOMINAL 32.0 AND MINIMUM 31.5 AND MAXIMUM 32.5 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.050 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.238 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.486 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILC3098-16 | 81349 |
| MIL-PRF-3098/16 | 81349 |
| CR36/U8M500000 | 81349 |
| CR-36A/U8.500000MHZ | 81349 |