NSN 5955-00-951-9026 · NIIN 009519026 · FSC 5955
NO DASHES 5955009519026
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | NOMINAL 32.0 AND MINIMUM 31.5 AND MAXIMUM 32.5 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 80.0 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AFGA | OPERATING TEMP RANGE | CELSIUS 80.0 TO 90.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 5.0 AND MILLIWATTS MINIMUM 4.0 AND MILLIWATTS MAXIMUM 6.0 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 35.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.238 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.486 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.008 TO 0.008 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.050 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 85.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 6.200 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR-36A/U6.200000MHZ | 81349 |
| MILC3098-16 | 81349 |
| CR36/U6M200000 | 81349 |
| MIL-PRF-3098/16 | 81349 |