NSN 5955-00-954-3618 · NIIN 009543618 · FSC 5955
NO DASHES 5955009543618
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 85.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 11.500 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 80.0 TO 90.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 2.0 AND MILLIWATTS MAXIMUM 3.0 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 22.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 31.5 AND MAXIMUM 32.5 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.023 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 80.0 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.0008 TO 0.0008 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR36/U11M50000 | 81349 |
| CR-36A/U11.500000MHZ | 81349 |
| MIL-PRF-3098/16 | 81349 |
| MILC3098-16 | 81349 |
Supersedes
This item replaces cancelled NIINs 002674197 · 008923481. An older drawing citing one of those numbers resolves here.