NSN 5955-00-984-2973 · NIIN 009842973 · FSC 5955
NO DASHES 5955009842973
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 4.0 AND MILLIWATTS MAXIMUM 6.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 14.155 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.998 AND INCHES MAXIMUM 1.023 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 22.0 |
| STYL | STYLE DESIGNATOR | |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 3 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 31.5 AND MAXIMUM 32.5 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-PRF-3098/3 | 81349 |
| CR18/U14M15500 | 81349 |
| MIL-C-3098/3 | 81349 |
| S290-9047-00 | 01281 |
| 290-9047-00 | 13499 |
| 290-9009/9258-00 | 13499 |
Supersedes
This item replaces cancelled NIIN 009012027. An older drawing citing one of those numbers resolves here.