NSN 5955-00-985-8789 · NIIN 009858789 · FSC 5955
NO DASHES 5955009858789
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.00025 TO 0.00025 |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 75.0 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS -55.0 TO 90.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 70.0 TO 80.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 0.8 AND MILLIWATTS MAXIMUM 1.2 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.317 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| STYL | STYLE DESIGNATOR | |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 46.875 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.001 TO 0.001 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 40.0 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.007 TO 0.007 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILC3098 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR65/U46M87500 | 81349 |
| MIL-PRF-3098/43 | 81349 |
| CR-65/U46.875000MHZ | 81349 |
| MILC3098 | 81349 |
| CR-32/U46.875000MHZ | 81349 |
| MILC3098-43 | 81349 |
Supersedes
This item replaces cancelled NIIN 008574616. An older drawing citing one of those numbers resolves here.