NSN 5955-00-997-0794 · NIIN 009970794 · FSC 5955
NO DASHES 5955009970794
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.408 AND INCHES MAXIMUM 0.428 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.0005 TO 0.0005 |
| ADPR | BODY THICKNESS | INCHES MINIMUM 0.142 AND INCHES MAXIMUM 0.149 |
| ADUM | OVERALL THICKNESS | INCHES MINIMUM 0.166 AND INCHES MAXIMUM 0.176 |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 2.0 AND MILLIWATTS MAXIMUM 3.0 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.036 AND INCHES MAXIMUM 0.042 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 46.4583 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AFGA | OPERATING TEMP RANGE | FAHRENHEIT 50.0 TO 90.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.723 AND INCHES MAXIMUM 0.773 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| FEAT | SPECIAL FEATURES | THIS PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.525 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 00724-99-20810-249 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 50.0 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.394 AND INCHES MAXIMUM 0.401 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 13-49-46R4583B | 01766 |
| 13-49-46R4583B/00724 | 00724 |
| 13-49-46R4583B | 00724 |
| 13-49-46R4583B | 00136 |