NSN 5955-00-998-4584 · NIIN 009984584 · FSC 5955
NO DASHES 5955009984584
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 40.0 |
| MATT | MATERIAL | COVER HOLDER GLASS |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.402 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.183 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 45 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 56.450 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.016 AND INCHES MAXIMUM 0.019 |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE AND FIFTH OVERTONE |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.0025 TO 0.0025 AND -0.0050 TO 0.0050 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.530 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.5003 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.435 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 TO 108 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.184 AND INCHES MAXIMUM 0.200 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 AND CELSIUS -55.0 TO 125.0 |
| STYL | STYLE DESIGNATOR | |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.150 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 247297-4019 | 65597 |
| CR67/U56M45000 | 81349 |
| MIL-C-3098/45 | 81349 |
| CR67B/U56M45000 | 81349 |
| MIL-PRF-3098/45 | 81349 |
Supersedes
This item replaces cancelled NIIN 001065005. An older drawing citing one of those numbers resolves here.