NSN 5955-01-069-6387 · NIIN 010696387 · FSC 5955
NO DASHES 5955010696387
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.530 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.500 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.435 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.402 |
| ADPR | BODY THICKNESS | INCHES NOMINAL 0.150 |
| ADUM | OVERALL THICKNESS | INCHES NOMINAL 0.183 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.017 |
| AEHC | MODE OF OSCILLATION | FIFTH OVERTONE AND THIRD OVERTONE |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | NOMINAL 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 108.750 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.192 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -40.0 TO 90.0 AND CELSIUS -55.0 TO 105.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 2.0 AND MILLIWATTS MINIMUM 1.6 AND MILLIWATTS MAXIMUM 2.4 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 AND -0.003 TO 0.003 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MINIMUM 50.0 AND MAXIMUM 60.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 TO 57 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CR80AU108-75MHZ | 81349 |
| MIL-C-3098/57 | 81349 |