NSN 5955-01-194-3081 · NIIN 011943081 · FSC 5955
NO DASHES 5955011943081
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Application: 4920-01-148-5597
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.530 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.5003 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.435 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.402 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.150 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.183 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.016 AND INCHES MAXIMUM 0.019 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 29.5 AND MAXIMUM 30.5 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 24.000 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.184 AND INCHES MAXIMUM 0.200 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -40.0 TO 90.0 AND CELSIUS -55.0 TO 105.0 |
| AGAV | END ITEM IDENTIFICATION | 4920-01-148-5597 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 4.0 AND MILLIWATTS MAXIMUM 6.0 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 AND -0.003 TO 0.003 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 25.0 |
| MATT | MATERIAL | COVER HOLDER GLASS |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-3098 TO 62 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-3098 TO 47 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-PRF-3098/47 | 81349 |
| MIL-C-3098/47 | 81349 |
| CR69A-U24M00000 | 81349 |
| CR69/U24M00000 | 81349 |
| MIL-PFR-3098-47 | 81349 |
Supersedes
This item replaces cancelled NIIN 014676152. An older drawing citing one of those numbers resolves here.