NSN 5955-01-380-5963 · NIIN 013805963 · FSC 5955
NO DASHES 5955013805963
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.250 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.281 |
| ABMZ | DIAMETER | INCHES MAXIMUM 0.506 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 0.583 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.0175 AND INCHES MAXIMUM 0.0205 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | MINIMUM 29.5 AND MAXIMUM 30.5 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MINIMUM 3.7 AND MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 14.580 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.282 |
| AEHV | DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL CENTERS | INCHES NOMINAL 0.141 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 105.0 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MINIMUM 4.0 AND MILLIWATTS MAXIMUM 6.0 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 |
| CRLM | SECOND CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.282 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 25.0 |
| FEAT | SPECIAL FEATURES | CRYSTAL IS SAME AS A CR-64 EXCEPT HOLDER IS A HC-37/U |
| STYL | STYLE DESIGNATOR |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A3132203-1 | 23875 |
| A3132203-1 | 21821 |
| A3132203-1 | 52847 |
| A3132203-1 | 75378 |
| A3132203-1 | 80063 |
| A3132203-1 | 00136 |
| A3132203-1 | 00809 |
| A3132203-1 | 18853 |