NSN 5955-01-393-7895 · NIIN 013937895 · FSC 5955
NO DASHES 5955013937895
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Application: 5895-01-288-6340
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.265 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.600 |
| ABMZ | DIAMETER | INCHES MAXIMUM 0.325 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 0.420 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.016 AND INCHES MAXIMUM 0.029 |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE |
| AEHD | CIRCUIT RESONANCE | ANTIRESONANCE |
| AEHE | LOAD CAPACITANCE IN PICOFARADS | NOMINAL 20.0 |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 53.000 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -45.0 TO 85.0 |
| AGAV | END ITEM IDENTIFICATION | 5895-01-288-6340 |
| CQYL | DRIVE LEVEL RATING | MICROWATTS MINIMUM 240.0 AND MICROWATTS MAXIMUM 1000.0 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | MAXIMUM 40.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 80063-A3110450 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SOURCE CONTROL 80063-A3110450-001 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A3110450-001 | 80063 |
| 104-8-1 | 00136 |