NSN 5955-01-413-9944 · NIIN 014139944 · FSC 5955
NO DASHES 5955014139944
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Application: AN/FPS-124
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.252 AND INCHES MAXIMUM 0.265 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.180 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.319 AND INCHES MAXIMUM 0.327 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.420 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.016 AND INCHES MAXIMUM 0.019 |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 72.000 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.210 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 75.0 TO 85.0 |
| AGAV | END ITEM IDENTIFICATION | AN/FPS-124 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS MAXIMUM 1.0 |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.0005 TO 0.0005 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 56232-1219373 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION CONTROL 56232-1219373-201 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1219373-201 | 56232 |
| 1361901 | 74306 |
| 1361901 | 00136 |
| 1219373-201 | 03538 |