NSN 3040-01-508-6581 · NIIN 015086581 · FSC 3040
NO DASHES 3040015086581
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Application: SEAWOLF CLASS SUBMARINE SSN 23, EXTERNAL STBD TRAY HANDLING WINCH CABLE DRUM LEVEL WIND ASSEMBLY
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 36.125 |
| AGAV | END ITEM IDENTIFICATION | SEAWOLF CLASS SUBMARINE SSN 23, EXTERNAL STBD TRAY HANDLING WINCH CABLE DRUM LEVEL WIND ASSEMBLY |
| AKAF | SHAFT THREAD DIRECTION | SECOND END SECOND PORTION LEFT-HAND |
| CBBL | FEATURES PROVIDED | WORM BODY END(S) TAPERED BEARING SURFACE |
| CFFB | WORM THREAD QUANTITY | 4 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 0.500 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 14.500 |
| CFFG | WORM HELIX ANGLE | 14.03624 DEG |
| CFFK | WORM OUTSIDE DIAMETER | INCHES NOMINAL 2.000 |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 36.125 |
| CFFR | TAPERED BEARING SURFACE LARGEST DIAMETER | INCHES NOMINAL 2.000 |
| CFFS | TAPERED BEARING SURFACE SMALLEST DIAMETER | INCHES NOMINAL 1.760 |
| CFFT | TAPERED BEARING SURFACE LENGTH | INCHES NOMINAL 0.120 |
| CFFW | SHAFT LOCATION | ONE END OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END EIGHTH PORTION INCHES NOMINAL 1.000 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FIFTH PORTION INCHES NOMINAL 0.250 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FIRST PORTION INCHES NOMINAL 0.880 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FOURTH PORTION INCHES NOMINAL 1.060 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END NINTH PORTION INCHES NOMINAL 0.750 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END SECOND PORTION INCHES NOMINAL 0.180 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END SEVENTH PORTION INCHES NOMINAL 0.500 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END SIXTH PORTION INCHES NOMINAL 1.060 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END THIRD PORTION INCHES NOMINAL 2.640 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FIRST PORTION INCHES NOMINAL 2.000 |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | FIRST END THIRD PORTION INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2650 |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | FIRST END THIRD PORTION INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.502 |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | FIRST END FIFTH PORTION INCHES NOMINAL 0.1880 |
| FEAT | SPECIAL FEATURES | PART NAME BY CONTROLLING AGENCY: SCREW, POWER LH. FIRST END, EIGHTH PORTION, TWO PARALLEL FLATS 2.50 ACROSS. ACME THREAD AREA 18.00 FROM FIRST END HAS 1.88 HOLE DRILLED THUR. NOTE: REFERENCING DRAWING 596-7410365-79 WILL SHOW, SCREW POWER LH, P/N B434-8212-23. FOR CORRECTION TO DRAWING REFER TO (ER) ENGINEERING REPORT ERMF02198 INDICATING DRAWING 596-7410365-79 IS NOW, SCREW POWER RH, P/N B434-8212-24. |
| MATT | MATERIAL | NICKEL ALLOY |