NSN 5962-00-357-1043 · NIIN 003571043 · FSC 5962
NO DASHES 5962003571043
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| CQZP | INPUT CIRCUIT PATTERN | QUAD 3-2-3-2 INPUT |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.185 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | W/RESET AND BIPOLAR AND HIGH PERFORMANCE AND BURN IN AND HERMETICALLY SEALED |
| TTQY | TERMINAL TYPE AND QUANTITY | PRINTED CIRCUIT 16 |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CSSL | DESIGN FUNCTION AND QUANTITY | LATCH 4 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE -1.5 AND VOLTS MAXIMUM POWER SOURCE 5.5 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 22.00 AND NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT 27.00 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 22915-2-338 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.785 AND INCHES MAXIMUM 0.815 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.260 |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2M338PB8135 | 22915 |
| SN54279J | 01295 |