NSN 5962-01-065-9896 · NIIN 010659896 · FSC 5962
NO DASHES 5962010659896
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Application: RADAR SET TYPE AN/FPS-115
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.660 AND INCHES MAXIMUM 0.785 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.180 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | MILLIWATTS 160.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 0.0 TO 70.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| AGAV | END ITEM IDENTIFICATION | RADAR SET TYPE AN/FPS-115 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND MEDIUM POWER AND MEDIUM SPEED AND W/TOTEM POLE OUTPUT |
| CQSJ | INCLOSURE MATERIAL | PLASTIC |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | QUAD 2 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | GATE, NAND 4 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | JOINT ELECTRON DEVICE ENGINEERING COUNCIL T0-116 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 5.5 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 22.00 AND NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT 15.00 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 04761-640-200066 |
| TTQY | TERMINAL TYPE AND QUANTITY | PRINTED CIRCUIT 14 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| DM7400N | 27014 |
| 640-200066-001 | 27014 |
| SN7400N | 01295 |
| 640-200066-001 | 01295 |
| 640-200066-001 | 04761 |
| 640-200066-001 | 18324 |