NSN 5962-01-083-1995 · NIIN 010831995 · FSC 5962
NO DASHES 5962010831995
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.785 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.310 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.185 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | BURN IN AND HERMETICALLY SEALED |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | HEX 1 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | INVERTER, DIGITAL 6 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | MIL-M-38510 D-1 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 4.50 AND NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT 5.00 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 07421-349-113-257 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| DM54S04J/883 | 27014 |
| SNC54S04J | 01295 |
| 54S04DMQB | 07263 |
| 349-113-257 | 07421 |
| RB54S04F | 18324 |