NSN 5962-01-112-1357 · NIIN 011121357 · FSC 5962
NO DASHES 5962011121357
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.371 AND INCHES MAXIMUM 0.400 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.285 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.080 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | BURN IN AND MONOLITHIC AND HIGH POWER AND HIGH SPEED AND W/SHORT CIRCUIT PROTECTION |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| CQSZ | INCLOSURE CONFIGURATION | FLAT PACK |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | DUAL 2 WIDE 4-2 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | DRIVER, LINE 2 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 6.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 03640-6116705 |
| TTQY | TERMINAL TYPE AND QUANTITY | FLAT LEADS 16 |