NSN 5962-01-123-5436 · NIIN 011235436 · FSC 5962
NO DASHES 5962011235436
In Stock
MICROCIRCUIT,LINEAR
Microcircuits, Electronic
Application: GEN INSTRUM 76301
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.335 AND INCHES MAXIMUM 0.370 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.165 AND INCHES MAXIMUM 0.185 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| AGAV | END ITEM IDENTIFICATION | GEN INSTRUM 76301 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND BURN IN |
| CQSJ | INCLOSURE MATERIAL | METAL |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| CQZP | INPUT CIRCUIT PATTERN | 3 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | CONVERTER, VOLTAGE TO FREQUENCY 1 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | JOINT ELECTRON DEVICE ENGINEERING COUNCIL T0-100 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MINIMUM POWER SOURCE -22.0 AND VOLTS MAXIMUM POWER SOURCE 22.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 97424-6900W54 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 10 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6900W54P004 | 97424 |
| VFC32VM/883B | 13919 |
| 2D105 | 13919 |
| VFC32VM/MIL | 13919 |
| 20105 | 13919 |