NSN 5962-01-181-1744 · NIIN 011811744 · FSC 5962
NO DASHES 5962011811744
In Stock
MICROCIRCUIT,LINEAR
Microcircuits, Electronic
Application: 5840-01-147-7235 RADIO FREQUENCY JAMMER
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.253 AND INCHES MAXIMUM 0.256 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 100.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AGAV | END ITEM IDENTIFICATION | 5840-01-147-7235 RADIO FREQUENCY JAMMER |
| CBBL | FEATURES PROVIDED | HYBRID AND HERMETICALLY SEALED AND THICK FILM |
| CQSJ | INCLOSURE MATERIAL | METAL |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| CQZP | INPUT CIRCUIT PATTERN | 1 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | AMPLIFIER, RADIO FREQUENCY 1 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | JOINT ELECTRON DEVICE ENGINEERING COUNCIL T0-8 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 17.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 72314-1500-C1019 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 4 |