NSN 5962-01-220-3061 · NIIN 012203061 · FSC 5962
NO DASHES 5962012203061
In Stock
MICROCIRCUIT,LINEAR
Microcircuits, Electronic
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 2.400 AND INCHES MAXIMUM 2.412 |
| ADAT | BODY WIDTH | INCHES MINIMUM 1.150 AND INCHES MAXIMUM 1.162 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.210 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -46.5 TO 110.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -46.5 TO 110.0 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND W/RESISTOR AND POSITIVE OUTPUTS |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQZP | INPUT CIRCUIT PATTERN | 10 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | SWITCH 1 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 12.0 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 150.00 AND NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT 150.00 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 18876-10273612 |
| TTQY | TERMINAL TYPE AND QUANTITY | PRINTED CIRCUIT 46 |