NSN 5970-00-578-1237 · NIIN 005781237 · FSC 5970
NO DASHES 5970005781237
In Stock
INSULATION SLEEVING,ELECTRICAL,S
Electrical Insulators and Insulating Materials
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 1500 |
| ABJH | TEMP RATING | CELSIUS -55.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADZC | ENVIRONMENTAL PROTECTION | FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| AFZQ | SMALL END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.120 |
| AFZR | DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 3.200 |
| AFZS | DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 1.410 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.640 |
| AGAP | ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | AFTER UNRESTRICTED RECOVERY NOMINAL 90.0 |
| HGTH | HEIGHT | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 2.170 |
| AGAP | ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | AS SUPPLIED NOMINAL 45.0 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.850 |
| AGAM | DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 1.200 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 1.380 |
| AFZP | LARGE END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.180 |
| HUES | COLOR | BLACK |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED RUBBER NEOPRENE (USE RC0007) |
| STYL | STYLE DESIGNATOR | |
| UKBG | DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | VOLTS PER MIL /0.001 INCH/ 200.0 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.400 |
| FEAT | SPECIAL FEATURES | INCLUDES MOLDING PORTS |
| FLEX | FLEXIBILITY | FLEXIBLE |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 339H186-2-MP | 20999 |
| 339H186-2-MP | 75037 |
| 339H186-2-MP | 7V059 |
| 228A075-5-00 | 06090 |
| 11070390-7 | 18876 |