NSN 5970-01-025-4001 · NIIN 010254001 · FSC 5970
NO DASHES 5970010254001
In Stock
INSULATION SLEEVING,ELECTRICAL,S
Electrical Insulators and Insulating Materials
Application: MRAP RG-33
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJH | TEMP RATING | CELSIUS -55.0 AND CELSIUS 135.0 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT |
| AFZP | LARGE END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.080 |
| AFZQ | SMALL END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.045 |
| AGAH | MAIN BODY OVERALL LENGTH | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 7.290 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.470 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.410 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 1.160 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.470 |
| AGAM | DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 5.963 |
| AGAV | END ITEM IDENTIFICATION | MRAP RG-33 |
| BNKG | END LARGEST DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 1.352 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 1200 |
| CQXG | LIP HEIGHT | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.120 |
| CRDG | LIP WIDTH | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.065 |
| FEAT | SPECIAL FEATURES | RED COLOR STRIPE; DRAIN HOLES INCLUDED |
| FLEX | FLEXIBILITY | FLEXIBLE |
| HGTH | HEIGHT | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.960 |
| HUES | COLOR | BLACK |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED PLASTIC CROSS-LINKED POLYOLEFIN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCATION NOT OTHERWISE SPECIFIED MIL SPEC SINGLE MATERIAL RESPONSE -IL-I-81765 TO 1,TYE II |
| STYL | STYLE DESIGNATOR | |
| UKBG | DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | VOLTS PER MIL /0.001 INCH/ 200.0 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS3117-05AU | 81343 |
| AS31171 | 81343 |
| M85049/68-2A05U | 81349 |
| MIL-C-85049/68 | 81349 |
| MS3117-05AU | 96906 |
| 222D253-4-22 | 06090 |
| 222D253-4-61/09 | 06090 |
| 951320-5 | 06481 |
| AS31171 | 0U583 |
| MS3117-05AU | 0U583 |
Supersedes
This item replaces cancelled NIINs 001108307 · 010885484. An older drawing citing one of those numbers resolves here.