NSN 5970-01-025-4002 · NIIN 010254002 · FSC 5970
NO DASHES 5970010254002
In Stock
INSULATION SLEEVING,ELECTRICAL,S
Electrical Insulators and Insulating Materials
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJH | TEMP RATING | CELSIUS -55.0 AND CELSIUS 135.0 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT |
| AFZP | LARGE END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.080 |
| AFZQ | SMALL END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.045 |
| AGAH | MAIN BODY OVERALL LENGTH | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 8.410 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.720 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.480 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.720 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 1.340 |
| AGAM | DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 7.128 |
| BNKG | END LARGEST DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 1.532 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 1200 |
| CQXG | LIP HEIGHT | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.120 |
| CRDG | LIP WIDTH | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.065 |
| FEAT | SPECIAL FEATURES | RED COLOR STRIPE; DRAIN HOLES INCLUDED |
| FLEX | FLEXIBILITY | FLEXIBLE |
| HGTH | HEIGHT | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 1.080 |
| HUES | COLOR | BLACK |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED PLASTIC CROSS-LINKED POLYOLEFIN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCATION NOT OTHERWISE SPECIFIED MIL SPEC SINGLE MATERIAL RESPONSE -IL-I-81765 TO 1,TYE II |
| STYL | STYLE DESIGNATOR | |
| UKBG | DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | VOLTS PER MIL /0.001 INCH/ 200.0 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS3117-06AU | 81343 |
| AS31171 | 81343 |
| MIL-C-85049/68 | 81349 |
| M85049/68-2A06U | 81349 |
| MS3117-06AU | 96906 |
| 1126-4-JDL | K1793 |
| 1126-4-JDL | K0720 |
| 222D263-4-61/09 | 06090 |
| MS3117-06AU | 0U583 |
| M85049/141-14BUD | 0U583 |
| MS85049/141-2B14U | 0U583 |
| AS31171 | 0U583 |
Supersedes
This item replaces cancelled NIINs 001108311 · 010882969. An older drawing citing one of those numbers resolves here.