NSN 5977-00-242-1757 · NIIN 002421757 · FSC 5977
NO DASHES 5977002421757
In Stock
BRUSH,ELECTRICAL CONTACT
Electrical Contact Brushes and Electrodes
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AABU | SHUNT POSITION DESIGNATOR | 1 AND 3 AND 7 AND 9 |
| AAQL | BODY STYLE | |
| ABGL | WIDTH | INCHES NOMINAL 1.250 |
| ABNM | THICKNESS | INCHES NOMINAL 0.875 |
| ABRY | LENGTH | INCHES NOMINAL 2.750 |
| AHXP | BRUSH SHUNT LENGTH | ALL SHUNTS INCHES NOMINAL 4.500 |
| AHXR | TERMINAL SLOT WIDTH | INCHES NOMINAL 0.219 |
| BTHR | TOP STYLE | |
| CQGT | CONTACT FACE STYLE | |
| CQPY | BEVEL ANGLE | DEGREES NOMINAL 15.0 |
| CQYQ | CLIP TYPE | NEMA HAMMER TYPE A |
| CRBG | SHUNT INSULATION PROVISION AND QUANTITY | UNINSULATED 4 |
| CRMK | ANGLE | DEGREES NOMINAL 20.0 |
| FEAT | SPECIAL FEATURES | CENTER OF CLIP TURNED UP 0.250 IN. W,0.188 IN. LG IN LINE WITH BACK OF BRUSH |
| MATT | MATERIAL | ELECTROGRAPHITIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE HELWIG CARBON GRADE H35 |
| STYL | STYLE DESIGNATOR | |
| TTQY | TERMINAL TYPE AND QUANTITY | STRAIGHT W/SLOT 2 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12-871227-730-2-01 | 28118 |
| ANSI/NEMA PUB NO. CB1 | 81705 |
| 05-180-051-00-157 | 92392 |
| 05-180-051PC7 | 93293 |
| 05-166-997PC7 | 93293 |