NSN 5977-00-586-3653 · NIIN 005863653 · FSC 5977
NO DASHES 5977005863653
In Stock
BRUSH,ELECTRICAL CONTACT
Electrical Contact Brushes and Electrodes
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRY | LENGTH | INCHES NOMINAL 2.750 |
| CRMK | ANGLE | DEGREES NOMINAL 20.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | MATT AND MDCL |
| CQYQ | CLIP TYPE | NEMA HAMMER TYPE A |
| AAQL | BODY STYLE | |
| ABGL | WIDTH | INCHES NOMINAL 1.250 |
| ABNM | THICKNESS | INCHES NOMINAL 1.125 |
| STYL | STYLE DESIGNATOR | |
| TTQY | TERMINAL TYPE AND QUANTITY | STRAIGHT W/SLOT 1 |
| AHXP | BRUSH SHUNT LENGTH | ALL SHUNTS INCHES NOMINAL 4.500 |
| AHXR | TERMINAL SLOT WIDTH | INCHES NOMINAL 0.219 |
| BTHR | TOP STYLE | |
| CQGT | CONTACT FACE STYLE | |
| CQPY | BEVEL ANGLE | DEGREES NOMINAL 15.0 |
| CRBG | SHUNT INSULATION PROVISION AND QUANTITY | UNINSULATED 4 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE UNION CARBIDE COR,CARBON RODUCTS DIV,GR SA-45 |
| AACQ | PERIPHERAL SPEED | FEET PER MINUTE 8000 |
| FEAT | SPECIAL FEATURES | CENTER OF CLIP TURNED UP 0.250 IN. W,0.188 IN. LG IN LINE WITH BACK OF BRUSH |
| MATT | MATERIAL | ELECTROGRAPHITIC |
| AABU | SHUNT POSITION DESIGNATOR | 1 AND 3 AND 7 AND 9 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RC36-4001N | 42451 |
| PA4872APCRC36-4001N | 42451 |
| RC36-4001 | 82214 |
| K163666PC55 | 01406 |
| RC36-4001 | 0AHP6 |
| RC36-4001N | 0AHP6 |
| PA4872APCRC36-4001N | 0AHP6 |
Supersedes
This item replaces cancelled NIIN 005863658. An older drawing citing one of those numbers resolves here.