NSN 5977-00-617-1615 · NIIN 006171615 · FSC 5977
NO DASHES 5977006171615
In Stock
BRUSH,ELECTRICAL CONTACT
Electrical Contact Brushes and Electrodes
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQGT | CONTACT FACE STYLE | |
| MATT | MATERIAL | CARBON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE NATIONAL GRADE SA45 |
| ABNM | THICKNESS | INCHES MINIMUM 0.309 AND INCHES MAXIMUM 0.313 |
| AEUS | CLIP LENGTH | INCHES NOMINAL 0.688 |
| CRBG | SHUNT INSULATION PROVISION AND QUANTITY | UNINSULATED 1 |
| CQPY | BEVEL ANGLE | DEGREES NOMINAL 15.0 |
| CQYQ | CLIP TYPE | NEMA HAMMER TYPE ANGULAR A-EXTENDED |
| AHXP | BRUSH SHUNT LENGTH | SINGLE SHUNT INCHES NOMINAL 1.625 |
| BTHR | TOP STYLE | |
| CRNQ | CLIP BEVEL ANGLE IN DEG | NOMINAL 30.0 |
| CRQC | TERMINAL BEND ANGLE | DEGREES NOMINAL 60.0 |
| AABU | SHUNT POSITION DESIGNATOR | 8 |
| AAQL | BODY STYLE | |
| ABGL | WIDTH | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.625 |
| TTQY | TERMINAL TYPE AND QUANTITY | BENT W/SLOT 1 |
| STYL | STYLE DESIGNATOR | |
| CRMK | ANGLE | DEGREES NOMINAL 30.0 |
| ABRY | LENGTH | INCHES NOMINAL 1.250 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| K1334377P1 | 24446 |
| K-1334377P1 | 01288 |
| 63000883 | 0AHP6 |
Supersedes
This item replaces cancelled NIIN 002847245. An older drawing citing one of those numbers resolves here.