NSN 5985-00-404-5221 · NIIN 004045221 · FSC 5985
NO DASHES 5985004045221
In Stock
ATTENUATOR,VARIABLE
Antennas, Waveguides, and Related Equipment
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHUC | COAXIAL CONNECTOR SERIES DESIGNATION | N |
| CGGK | MOUNTING THREAD QUANTITY | PER INCH 32 |
| CQTQ | ADJUSTMENT DEVICE TYPE AND QUANTITY | KNOB 1 |
| AJDB | POWER RATING | WATTS AVERAGE 10.0 |
| AHTW | VOLTAGE STANDING WAVE RATIO | 1.00 |
| ASYF | ATTENUATION VARIATION METHOD | CONTINUOUS |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BNGR | FREQUENCY RANGE | GIGAHERTZ MINIMUM 2.000 AND GIGAHERTZ MAXIMUM 12.400 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES NOMINAL 0.880 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.530 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 4.000 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.190 |
| CTGG | IMPEDANCE RATING IN OHMS | INPUT-OUTPUT 50.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 18323-990C929H02 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.000 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES NOMINAL 4.300 |
| AAQL | BODY STYLE | |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ASYC | INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 1.0 |
| ASYD | OVERALL ATTENUATION RANGE IN DECIBELS | 0.0 TO 20.0 |
| AAFS | APPLICATION DESIGN | TRANSMISSION LINE |
| TTQY | TERMINAL TYPE AND QUANTITY | MALE COAXIAL CONNECTOR 1 AND CONNECTOR, COAXIAL, FEMALE 1 |
| CQYJ | MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 792 | 99899 |
| 990C929H02 | 18323 |