NSN 5990-00-062-9482 · NIIN 000629482 · FSC 5990
NO DASHES 5990000629482
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4100 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0610 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0470 AND INCHES MAXIMUM 0.0670 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1871 AND INCHES MAXIMUM 0.1873 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5620 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 30.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 160.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 145.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 91.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES NOMINAL 0.40 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.22 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8480 |
| CQTM | TERMINAL LOCATION | SIDE |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 880.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, UNDERCUT |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.980 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8090 AND INCHES MAXIMUM 0.8150 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 12 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11R062-9482 | 2X130 |
| 11-NHQ-23RWZS/F879 | 4H618 |
| 11-NHQ-23RWZS/F879 | 99932 |
| 11R10B11B-2 | 08719 |
| 9170131 | 18876 |