NSN 5990-00-065-3081 · NIIN 000653081 · FSC 5990
NO DASHES 5990000653081
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 163.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 25.92 AND MAXIMUM 35.08 |
| AJSS | FREQUENCY IN HERTZ | MINIMUM 396.0 AND MAXIMUM 404.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.1840 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | MINIMUM 13.60 AND MAXIMUM 18.40 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | MINIMUM 147.90 AND MAXIMUM 200.10 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 3.000 AND INPUT TO OUTPUT MAXIMUM 5.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 30.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8128 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.7360 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0630 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 22.00 AND MAXIMUM 33.00 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 5.70 AND MAXIMUM 9.70 |
| AJTA | ZRS RESISTANCE IN OHMS | MINIMUM 37.60 AND MAXIMUM 56.40 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 14.11 AND MAXIMUM 19.09 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 6.80 AND MAXIMUM 7.80 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.440 AND ROTOR TO STATOR MAXIMUM 0.468 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 25.7 AND MAXIMUM 26.3 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 720.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.0 TO 12.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4370 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 125.0 |
| AJSL | BODY SIZE | 10 |
| AAQL | BODY STYLE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 141974-01 | 35351 |