NSN 5990-00-072-9408 · NIIN 000729408 · FSC 5990
NO DASHES 5990000729408
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.3220 AND INCHES MAXIMUM 2.3270 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 75.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 15.50 |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | NOMINAL 0.4 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0580 AND INCHES MAXIMUM 1.0650 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 18.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6140 AND INCHES MAXIMUM 0.6380 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 2.5 |
| AJSL | BODY SIZE | 11 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 78.10 |
| AAQL | BODY STYLE | |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 52.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 340.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.000 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.484 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.6980 AND INCHES MAXIMUM 1.7030 |
| CQTM | TERMINAL LOCATION | REAR |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 550.00 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11-4111-03 | 58880 |
| 21302260 | 72314 |
| RS931-2E | 88818 |
| 330C784 | 95036 |
| RS931-2E | 05088 |
| 229-0143-00 | 13499 |
Supersedes
This item replaces cancelled NIINs 008013540 · 009325756. An older drawing citing one of those numbers resolves here.