NSN 5990-00-081-3357 · NIIN 000813357 · FSC 5990
NO DASHES 5990000813357
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CSSD | SHAFT STEP DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1200 AND INCHES MAXIMUM 0.1300 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8440 AND INCHES MAXIMUM 0.8480 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1560 AND INCHES MAXIMUM 0.8440 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, STEPPED, THREADED |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MINIMUM 0.1820 AND INCHES MAXIMUM 0.1920 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQTM | TERMINAL LOCATION | REAR |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNIFIED NATIONAL COARSE (UNC) |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.2400 AND INCHES MAXIMUM 1.2600 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.0625 AND INCHES MAXIMUM 1.0630 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9540 AND INCHES MAXIMUM 1.9600 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.0600 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.3180 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2480 AND INCHES MAXIMUM 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2450 AND INCHES MAXIMUM 0.2550 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.9400 AND INCHES MAXIMUM 1.9600 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0500 AND INCHES MAXIMUM 0.0700 |
| CTJB | SHAFT STEP LENGTH | SINGLE SHAFT INCHES MINIMUM 0.1820 AND INCHES MAXIMUM 0.1920 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.125 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.6330 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.1100 AND INCHES MAXIMUM 0.1300 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1555 AND INCHES MAXIMUM 0.1560 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3650 AND INCHES MAXIMUM 0.3850 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 105.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 41.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0020 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 2.2480 AND INCHES MAXIMUM 2.2520 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2J1SC1 | 03494 |
| XM8642899 | 03494 |
| L221047-1 | 06845 |
| VCT226A66-36 | 10112 |