NSN 5990-00-101-2524 · NIIN 001012524 · FSC 5990
NO DASHES 5990001012524
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.1660 AND INCHES MAXIMUM 2.1860 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9700 AND INCHES MAXIMUM 0.9800 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1873 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5340 AND INCHES MAXIMUM 0.5600 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 3160.00 AND MAXIMUM 3740.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | MINIMUM 78.00 AND MAXIMUM 84.00 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 594.00 AND MAXIMUM 736.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 79.00 AND MAXIMUM 85.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 415.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 64.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.800 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 25.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 35.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.5 TO 5.5 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6910 |
| CQTM | TERMINAL LOCATION | SIDE |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0260 AND INCHES MAXIMUM 0.0360 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0260 AND INCHES MAXIMUM 0.0360 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.560 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7537281P1 | 99971 |
| 7537281P0001 | 99971 |
| 11GLT25RHXB852 | 99971 |
| 11-GLT-25RHX/B852 | 99932 |
| 11GLT25RHX/BB2 | 99932 |
Supersedes
This item replaces cancelled NIINs 004855823 · 005394165. An older drawing citing one of those numbers resolves here.