NSN 5990-00-107-7156 · NIIN 001077156 · FSC 5990
NO DASHES 5990001077156
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0260 AND INCHES MAXIMUM 0.0360 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1873 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4750 AND INCHES MAXIMUM 0.4950 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.5 TO 5.5 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 40.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 20.00 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0015 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6910 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9700 AND INCHES MAXIMUM 0.9800 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 79.00 AND MAXIMUM 85.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 40.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 60.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 10.00 |
| CQTM | TERMINAL LOCATION | REAR |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT JAA0.125 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.1660 AND INCHES MAXIMUM 2.1860 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| AAQL | BODY STYLE | |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 364.50 AND MAXIMUM 445.50 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | MINIMUM 77.00 AND MAXIMUM 83.00 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 283.50 AND MAXIMUM 346.50 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0260 AND INCHES MAXIMUM 0.0360 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.850 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| U212534 | 82686 |
| 11GLD17RHXB794 | 99932 |
| 7537279P2 | 99971 |
| 7523585P2 | 99971 |
Supersedes
This item replaces cancelled NIIN 004870141. An older drawing citing one of those numbers resolves here.