NSN 5990-00-111-3614 · NIIN 001113614 · FSC 5990
NO DASHES 5990001113614
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.4190 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.7500 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| ALNF | SHAFT HOLE DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0600 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 17.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 320.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 1520.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 26.00 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 7340.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 20.00 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0775 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1940 |
| FEAT | SPECIAL FEATURES | SHAFT INTERNALLY THREADED 0-80 UNF 2B |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 6.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| AJSL | BODY SIZE | 8 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 1150.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 26.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0840 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2000 |