NSN 5990-00-136-7127 · NIIN 001367127 · FSC 5990
NO DASHES 5990001367127
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, TAPERED |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2500 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | MILLIMETER-MILLIGRAMS MAXIMUM 5000.00 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 2000.000 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6820 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 43.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 40.50 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1150 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 44.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 11.70 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 57.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 18.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 9.30 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.000 |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0 TO 45.0 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 28.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.9380 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.0750 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MINIMUM 95.0 AND MILLIAMPERES MAXIMUM 100.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 600.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8090 AND INCHES MAXIMUM 0.8150 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 2.0 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.0900 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1497781 | 55972 |
| AY110DL121B1 | 55972 |
| 1497781 | 96774 |
| AY110DL121B1 | 96774 |