NSN 5990-00-146-3534 · NIIN 001463534 · FSC 5990
NO DASHES 5990001463534
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 15.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 115.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 170.0 |
| AJSS | FREQUENCY IN HERTZ | MINIMUM 400.0 AND MAXIMUM 408.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 64.60 AND MAXIMUM 87.40 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 12.05 AND MAXIMUM 14.95 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 38.80 AND MAXIMUM 50.40 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 79.20 AND MAXIMUM 96.80 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0950 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 8.64 AND MAXIMUM 11.88 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 5.600 AND INPUT TO OUTPUT MAXIMUM 8.500 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | MINIMUM 468.00 AND MAXIMUM 572.00 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 10.6 AND MAXIMUM 12.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5400 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0680 AND INCHES MAXIMUM 0.0880 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8750 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.6320 |
| CQTM | TERMINAL LOCATION | REAR |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |