NSN 5990-00-169-7689 · NIIN 001697689 · FSC 5990
NO DASHES 5990001697689
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.2030 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7470 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6100 AND INCHES MAXIMUM 0.6400 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 12.0 |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 100.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 540.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 54.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 12.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 37.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 12.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.500 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0370 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.3680 |
| CQRG | BODY MATERIAL | ALUMINUM AND STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 260.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0350 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 45.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0300 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 5 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 123SCPE5323-1 | 26512 |
| 123SCPE5323-1 | 79RG9 |
| CM91014035 | 88818 |