NSN 5990-00-202-5127 · NIIN 002025127 · FSC 5990
NO DASHES 5990002025127
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1195 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 107.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0320 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 18.10 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 920.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 16.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 3.70 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -30.0 TO 30.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6000 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABXF | SHAFT LENGTH | BOTH SHAFTS INCHES NOMINAL 0.3750 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 240.0 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0220 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 8.90 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 8.50 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.9750 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0610 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 22.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 3.00 |
| ABWV | SHAFT DIAMETER | REAR SHAFT INCHES MAXIMUM 0.1200 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11CG5-002 | 93455 |
| TGH11E48080 | 99932 |
| TGH-11-E-4/B080 | 99932 |
| CR40911043 | 05088 |
| 229-3045-000 | 13499 |
| 229-3045-010 | 13499 |
Supersedes
This item replaces cancelled NIINs 009377648 · 009449843. An older drawing citing one of those numbers resolves here.