NSN 5990-00-206-3753 · NIIN 002063753 · FSC 5990
NO DASHES 5990002063753
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.07 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 75.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6250 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 490.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 3720.00 AND MAXIMUM 4700.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.7910 AND INCHES MAXIMUM 1.8110 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 31.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.07 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0450 AND INCHES MAXIMUM 0.0650 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.3360 AND INCHES MAXIMUM 2.3760 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5460 AND INCHES MAXIMUM 0.5650 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AJTC | ZSS RESISTANCE IN OHMS | MINIMUM 410.00 AND MAXIMUM 500.00 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 80.00 AND MAXIMUM 84.00 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 17.00 AND MAXIMUM 26.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.500 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 45.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1198 AND INCHES MAXIMUM 0.1200 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0790 |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M20708/2-05E | 81349 |
| M20708/2-005 | 81349 |
| 11CX4E | 81349 |
| MIL-S-20708/2 | 81349 |
| M20708/2C-005 | 81349 |
| 11CX4E | 88818 |
| 011-702M1 | 92703 |
| 011-702M1 | 99743 |
| 11CX4E | 99932 |
| 59 000-13 | D9853 |
| 1.791521 | D2865 |
| M20708/2-05E | 0U583 |
| SAE-AS20708/2 | 0U583 |
| AS20708/2 | 0VH01 |
| VCX11-4G1 | 10112 |