NSN 5990-00-220-5689 · NIIN 002205689 · FSC 5990
NO DASHES 5990002205689
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.5600 AND INCHES MAXIMUM 1.6220 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0002 AND INCHES MAXIMUM 0.0012 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0350 AND INCHES MAXIMUM 0.0450 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 20.0 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.0 TO 12.0 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 1700.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.990 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | GRAMS 75.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 3.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 11 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4950 AND INCHES MAXIMUM 0.5050 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 14 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 10.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 5.5 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 20.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 500.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 640.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 16.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2200.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0210 AND INCHES MAXIMUM 0.0310 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.0950 AND INCHES MAXIMUM 2.1670 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0980 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0680 AND INCHES MAXIMUM 0.0880 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1370 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 15R220-5689 | 2X130 |
| AY221S94B | 55972 |