NSN 5990-00-226-7894 · NIIN 002267894 · FSC 5990
NO DASHES 5990002267894
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 600.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 1990.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 77.30 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 60.0 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 1640.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 80.70 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 327.25 AND MAXIMUM 442.75 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 165.75 AND MAXIMUM 224.25 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.700 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 59.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 94.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.7620 AND INCHES MAXIMUM 1.7680 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9700 AND INCHES MAXIMUM 0.9800 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0450 AND INCHES MAXIMUM 0.0550 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5550 AND INCHES MAXIMUM 0.5730 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 8.0 |
| AJSL | BODY SIZE | 11 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 1.108 AND ROTOR TO STATOR MAXIMUM 1.200 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.3170 AND INCHES MAXIMUM 2.3410 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAQL | BODY STYLE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5RS941-2E | 88818 |