NSN 5990-00-241-3758 · NIIN 002413758 · FSC 5990
NO DASHES 5990002413758
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1620 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0610 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0810 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5620 |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 262.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 590.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 10.50 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 8.50 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 10.30 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 8.20 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 5.90 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.400 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 16.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6000 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 41.60 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 38.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 4.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.128 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TDH11F01 | 99932 |