NSN 5990-00-251-6719 · NIIN 002516719 · FSC 5990
NO DASHES 5990002516719
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.8610 AND INCHES MAXIMUM 1.8910 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0900 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.103 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8090 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.0550 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 25.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 600.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 920.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 14.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 1100.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 406.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 9.30 |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0 TO 45.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 6000.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 2000.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.6200 |
| ALNF | SHAFT HOLE DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 4800.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 43.00 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1150 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 500.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, TAPERED, HOLLOWED |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1190 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.2410 AND INCHES MAXIMUM 0.2710 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11TR251-6719 | 2X130 |
| AY1103-21B1 | 4K539 |
| 1486557-27 | 55972 |
| AY1103-21B1 | 55972 |
| 1486557-27 | 96774 |
| AY1103-21B1 | 96774 |
| AY1103-21B1 | 0SML3 |
| 11TR1427 | 14404 |