NSN 5990-00-251-7822 · NIIN 002517822 · FSC 5990
NO DASHES 5990002517822
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 280.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 1.0 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 3.40 AND MAXIMUM 4.20 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3560 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1198 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5550 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.008 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8010 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 5 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | MINIMUM 17.00 AND MAXIMUM 24.00 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2000 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.454 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 6.000 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -60.0 TO 60.0 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AAQL | BODY STYLE | |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M20708/5-01C | 81349 |
| 26V11TR4B | 81349 |
| 26V-11TR4C | 81349 |
| M20708-5 | 81349 |
| MIL-S-20708/5A | 81349 |
| M20708-5C001 | 81349 |
| MIL-S-20708/5 | 81349 |
| M20708/5-001 | 81349 |
| 26V-11TR4B | 88818 |
| 26V-11TR4C | 99932 |
| M20708/5-01C | 0U583 |
| AS20708 | 0VH01 |
| SAE-AS20708/5 | 0U583 |
| VTR11-18-4D | 10651 |
| 1359468 | 10001 |
Supersedes
This item replaces cancelled NIINs 005385994 · 006079787. An older drawing citing one of those numbers resolves here.