NSN 5990-00-254-4825 · NIIN 002544825 · FSC 5990
NO DASHES 5990002544825
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.0430 AND INCHES MAXIMUM 3.0830 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4320 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1867 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5450 AND INCHES MAXIMUM 0.5650 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 13.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 210.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 6000.00 AND MAXIMUM 7500.00 |
| AJTA | ZRS RESISTANCE IN OHMS | MINIMUM 1300.00 AND MAXIMUM 1650.00 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 78.00 AND MAXIMUM 82.00 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 13.00 AND MAXIMUM 18.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 45.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 65.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.05 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.05 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.3910 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 1.0970 AND INCHES MAXIMUM 1.1030 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 21 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M20708/21-02S | 81343 |
| AS20708/21 | 81343 |
| 15CT6D | 81349 |
| MILS20708-21D002 | 81349 |
| MIL-S-20708/21 | 81349 |
| M20708/21D-002 | 81349 |
| M20708/21-02D | 81349 |
| M20708/21-02D | 0U583 |
| AS20708/21 | 0VH01 |
| AS20708/21 | 0U583 |
| SAE-AS20708/21 | 0U583 |
| M20708/21-02S | 0U583 |
| CT15-6N3 | 10112 |
| VCT15-6N2 | 10112 |