NSN 5990-00-268-9075 · NIIN 002689075 · FSC 5990
NO DASHES 5990002689075
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| CWJD | SHAFT UNDERCUT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2190 |
| FEAT | SPECIAL FEATURES | SHAFT TO BE FITTED WITH NO. 00 WOOD RUFF KEY WHITNEY NO. 207 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-2335 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-2335 |
| AJSL | BODY SIZE | 45 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | AMPERES NOMINAL 2.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 23.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AAVH | SHOULDER DIAMETER | INCHES MAXIMUM 4.2500 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.6250 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 7.5300 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 4.5000 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2510 AND INCHES MAXIMUM 0.2550 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 1.1870 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.3500 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.9700 |
| AEDC | SHAFT UNDERCUT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0700 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGRS | DISTANCE BETWEEN FLANGES | INCHES NOMINAL 2.2500 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 50.0 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2500 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, TAPERED, THREADED, UNDERCUT |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 |
| CTBP | SHAFT TIP LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2120 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MAXIMUM 4.000 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.3130 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 3A |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILS2335TYPE6HDGMK10 | 81349 |
| 6HDG | 81349 |
| 6DG | 81349 |
| MIL-S-2335 | 81349 |
| VTDX45-6A1 | 10112 |
| 1480240 | 10001 |
| 213401PC1 | 10001 |
| 561793PC4 | 10001 |
| 561793-4 | 10001 |