NSN 5990-00-295-7068 · NIIN 002957068 · FSC 5990
NO DASHES 5990002957068
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 12.0 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4130 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 10 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.850 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 1090.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 15.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.05 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 9.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6540 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 445.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0630 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2100.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 445.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0270 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 220.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 920.00 |
| CQTM | TERMINAL LOCATION | REAR |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.1790 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10CT295-7068 | 2X130 |
| 10CT-0155-B | 51761 |
| 728961-2 | 55972 |
| AY503-5AL | 56232 |
| AY503-5A1 | 55973 |
| 718504-2 | 56232 |
| 728961-2 | 96774 |
| D728961-2 | 06840 |
| 10CT1151 | 14404 |
Supersedes
This item replaces cancelled NIINs 006468642 · 009705249. An older drawing citing one of those numbers resolves here.