NSN 5990-00-295-9135 · NIIN 002959135 · FSC 5990
NO DASHES 5990002959135
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1310 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 5.60 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 39.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0210 AND INCHES MAXIMUM 0.0310 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 9.80 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0210 AND INCHES MAXIMUM 0.0310 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 410.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 2.3 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 9.20 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 9.60 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 7.50 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 6.10 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.0 TO 12.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 21.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.5910 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 7.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5400 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 38.00 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.000 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8750 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AY231S4 | 19315 |
| 739436-3 | 19315 |
| AY231-4B | 19315 |
| 221028 | 36378 |
| C180328-9 | 37695 |
| AY231S4B | 55972 |
| PL0247 | 80063 |
| AN3108-22-9S | 81352 |
| AY231S4B | 96774 |
| 230-0076-00 | 13499 |
| 230-0076-000 | 13499 |
Supersedes
This item replaces cancelled NIIN 002959133. An older drawing citing one of those numbers resolves here.