NSN 5990-00-321-8458 · NIIN 003218458 · FSC 5990
NO DASHES 5990003218458
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 18.90 AND MAXIMUM 23.10 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.3190 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 49.00 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| ALNF | SHAFT HOLE DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0190 AND INCHES MAXIMUM 0.0200 |
| CQTM | TERMINAL LOCATION | REAR |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 600.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 42.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 9.20 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 41.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 19.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, HOLLOWED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.0730 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 5.85 AND MAXIMUM 7.15 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.500 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 1.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS MINIMUM 2500.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 120.0 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 243.00 |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0630 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.441 AND ROTOR TO STATOR MAXIMUM 0.467 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.6750 AND INCHES MAXIMUM 0.6810 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8350 AND INCHES MAXIMUM 0.8400 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0890 AND INCHES MAXIMUM 0.0910 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1497980-0001 | 55972 |
| 3563100-3049 | 55972 |
| 1497980-0001 | 96774 |
| 3563100-3049 | 96774 |
| 3563100-4039 | 96774 |
| 10134462 | A486G |