NSN 5990-00-330-5412 · NIIN 003305412 · FSC 5990
NO DASHES 5990003305412
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 4.70 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9950 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5900 AND INCHES MAXIMUM 0.6000 |
| AAQL | BODY STYLE | |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 16.50 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.7430 AND INCHES MAXIMUM 4.7990 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9950 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2402 AND INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6930 AND INCHES MAXIMUM 0.7190 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-14346 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.1090 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3100 AND INCHES MAXIMUM 0.3400 |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 90.0 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 30.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 4.0540 AND INCHES MAXIMUM 4.0800 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 234.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 83.00 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.027 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 445.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 5.3 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.240 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 1.300 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 002958181 · 006504610 · 006865572 · 007269340. An older drawing citing one of those numbers resolves here.